CM-L-G with housing
- Original manufacturer
- Consilium / Salwico
- Name
- CM-L-G with housing
- Model
- CM-L-G
- Part number
- 5100247-00A
Supply availability and delivery time require confirmation. A catalog reference does not imply stock.
Specifications
| Manufacturer approvals / certifications | Not provided by manufacturer |
|---|---|
| Manufacturer Article Number | 5100247-00A |
| Operating Voltage | 19-30 VDC |
| Current Consumption (at 24 V) | 70 mA |
| Loop Output Nominal Voltage | 35 VDC |
| Loop Maximum Output Current | 400 mA (< 15 minutes) |
| Loop Continuous Output Current | 200 mA |
| Max. No. Of Loop Units | 20 |
| Cable Terminals | 2.5 mm² |
| Operating Temperature | -40 °C to +70 °C |
| Storage Temperature | -50 °C to +70 °C |
| Relative Humidity | ≤ 95 % RH non-condensing |
| Addressing Method | DIP switch |
| Material | Nylon 6.6 |
| Weight (with Housing) | 140 g ± 5% |
| Colour Housing | Black (RAL 9005) |
| Colour Shell | Gray (RAL 7042) |
| Spare Part No. Cm-l-g | 5100245-00 |
| Spare Part No. For Housing | 5100102-01 |
| Loop Cable Requirement | See the Installation & Commissioning manual |
| Compatible Loop Units | All gas loop units that communicates with the IDAxt protocol |
| Compatible System | CGD50/500 |
| Dip Switch 8 | Always ON |
| Physical Address Selection | Binary address on the Backbone Bus via DIP poles 1–7; addresses 63–74 are allowed only under the specific conditions in the installation manual. |
| Mounting | Horizontal 35 mm DIN rail |
| Loop Connections | Original terminal table: loop A+ = 11, A− = 12; loop B+ = 13, B− = 14. Follow the original connection drawing. |
| Alarm / Fault Indicators | ALARM red steady: one or more gas alarms; off: no alarms. FAULT yellow steady: one or more faults; yellow flashing: booting or re-scanning the loop; off: no faults. |
| Ps Power-supply Indicator | Green: operational without power fault. Yellow steady: operational with one power fault, communication with loop units continues. Yellow flashing 0.5 s on/0.5 s off: boot loader during firmware download; the loop unit cannot communicate. Off: quarantine mode. |
| Com Backbone Indicator | Green steady: communication and received configuration. Green flashing 0.5 s on/0.5 s off: communication, awaiting configuration. Yellow steady: no communication. Yellow flashing 0.5 s on/0.5 s off: firmware transfer; 1 s on/0.5 s off: quarantine. |
| Transfer / Fault Diagnostics | PS yellow and COM green both flashing 0.5 s on/0.5 s off: software upload/download. All LEDs flashing: all DIP switches OFF or all ON; set to project documentation. Consult control-panel fault alarms and the CGD500 Installation or Service & Maintenance manual. |
| Original Mounting Dimensions | 99 mm vertical; 114.5 mm side horizontal; 29 mm overall front width; 22.5 mm front subdimension. See the original drawing for orientation and clearances. |
Compatibility
- CGD50/500; IDAxt gas loop units; follow the exact original installation manual.
Accessories
- Spare CM-L-G PCB module 5100245-00; housing spare 5100102-01, as printed in the original parts table.
- Loop cable selection and addresses63–74 require the original Installation & Commissioning manual.
Original documents & sources
Source pages
- https://www.consiliumsafety.com/content/uploads/products/en/5100247-00/5100247-00A_CM-L-G_M_EN_2020_E.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5100247-00/5100247-00A_CM-L-G_M_EN_2020_E.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5100247-00/5100247-00A_CM-L-G_M_EN_2020_E.pdf
Original manufacturer data retained. Product enquiry and technical sourcing by MAXONE Marine. Last reviewed: 2026-10-23T07:22:46.980048+00:00.