CN-SDR Base Sounder
- Original manufacturer
- Consilium / Salwico
- Name
- CN-SDR Base Sounder
- Model
- CN-SDR Base
- Part number
- 5100927-00A
Supply availability and delivery time require confirmation. A catalog reference does not imply stock.
Specifications
| Manufacturer approvals / certifications | Not provided by manufacturer |
|---|---|
| Manufacturer Article Number | 5100927-00A |
| Sounder Device | Piezo |
| Sounder Output | 73 to 88 dB (A) at 90°/1 m |
| Volume Control | Up to -15 dB adjustment |
| Sounder Tones | 12 tones DIP switch select (3 Approved) |
| Operating Voltage | 24-38 VDC |
| System Voltage | 35 VDC |
| Quiescent Current | 0.2 mA |
| Sounder Operating Current | 4 mA (Low) 6 mA (High) |
| Operating Temperature | -10 °C to +55 °C |
| Storage Temperature | -25 °C to +70 °C |
| Relative Humidity | 0 to 95% RH non-condensing |
| Ingress Protection | IP21C |
| Addressing Method | Soft addressing, non-volatile EEPROM |
| Material | ABS |
| Weight | 200 g ± 5% |
| Classification | EN54-3:2001 + A1:2002 + A2:2006 |
| Emc Conformity | BSEN50130-4 |
| Manufacturer-listed Systems | NSAC-1, TERRA FIRE, TERRA ONE (2021 B document) |
| Function / Detector Compatibility | Low-profile piezo sounder with integrated base for CN analogue addressable detectors; replaces CN-ABS Sounder |
| Spacer Accessory | 5100471-00A UB Spacer/EV-SB Spacer; use for surface cables, with access for 2 ×6 mm cables from top or bottom |
| Mounting Restriction | Flat ceiling mounting using two screws in provided slots; sounder MUST NOT be wall mounted |
| Cable Clearance | Connect loop wires to each terminal; push excess wire back through centre aperture so assembly is not restricted |
| Address Programming | Set loop address using 22100 CN-Programmer with 22101 CN-Programming Adapter or flying leads BEFORE attaching to base plate |
| Fitting / Removal | Push down in offset position and slide until it clicks; release using tool in rim holes and slide in reverse direction |
| Tone / Volume Adjustment | Select tone with DIL switches and volume with potentiometer; switches 1-4 are not used |
| Manufacturer Approval Limitation | Only maximum volume setting is approved; document marks tones 1, 4 and 5 approved and recommends tone 1 |
| Approved Tone Switch Settings | SW5/6/7/8: tone 1 OFF/OFF/OFF/OFF; tone 4 ON/ON/OFF/OFF; tone 5 OFF/OFF/ON/OFF |
| Connection Reference | Retain original p2 loop -ve/+ve IN/OUT, RIL and earth continuity (if fitted) connection diagram |
| Dimensions | Ø115 mm ×37.60 mm high (original dimensional drawing) |
Compatibility
- Requires technical confirmation; manufacturer compatibility evidence is not provided.
Accessories
- Not provided by manufacturer
Original documents & sources
Source pages
- https://www.consiliumsafety.com/content/uploads/products/en/5100927-00/5100927-00A_CN-SDR%20Base_I0_EN_2021_B.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5100927-00/5100927-00A_CN-SDR%20Base_I0_EN_2021_B.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5100927-00/5100927-00A_CN-SDR%20Base_I0_EN_2021_B.pdf
Original manufacturer data retained. Product enquiry and technical sourcing by MAXONE Marine. Last reviewed: Not provided.