Control M Gas Internal Gas Alarm Control Panel
- Original manufacturer
- Consilium / Salwico
- Name
- Control M Gas Internal Gas Alarm Control Panel
- Model
- Control M Gas Internal
- Part number
- 5110001-20A
Supply availability and delivery time require confirmation. A catalog reference does not imply stock.
Specifications
| Manufacturer approvals / certifications | Not provided by manufacturer |
|---|---|
| Model Variant | Control M Gas Internal |
| Manufacturer Article Number | 5110001-20A |
| Operating Voltage Range | 22-48 VDC |
| Current Consumption | 92 mA (at 24V) |
| Ingress Protection | IP55 |
| Operating Temperature | -5°C to +55°C |
| Weight | 620 g |
| Display | 4.3", 480×272 pixels, TFT |
| Usb Port | USB 1.1 Embedded Host |
| Rs-485 Interface | Isolated |
| 1 Digital Input | 24 VDC |
| 5 Digital Outputs | Relay contacts |
| 1 Power Output | 19-30 VDC, 0.5 A |
| Compatible Control Systems | CGD50/500 |
| Connection Module | BusCon M Gas |
| Addressing | Available addresses for Control M Gas Internal are between 1 and 10. As a system master controller it must have address 1. |
| Rs-485 Termination Dip Switch 1.1 (1) | BBI1: ON = Active; OFF = Deactivated |
| Rs-485 Termination Dip Switch 1.2 (2) | BBI2: ON = Active; OFF = Deactivated |
| Terminals | Figure 2. Terminal connections on BusCon M Gas For detailed terminal information, see datasheet for BusCon M Gas module. RS-485 Termination For RS-485 Termination the built-in terminator (120 ohm) shall be activated with the RS-485 DIP switch located on the rear of the front panel. For recommendations and examples on RS-485 Termination, refer to the Installation Manual. |
| Connections | Connections Control M Gas Internal mounts in the front of the central cabinet. Using ribbon cables connect the Control M Gas to BusCon M Gas. Figure 1. Control M Gas connected to BusCon M Gas |
| Panel Cutout / Mounting | Panel cutout: width123 +/-1.00 mm; height134 +3.00/-0.00 mm; four diameter5 mm mounting holes. Follow original drawing for hole positions. |
| Panel Face Dimensions | 144 x144 mm; mounting/cutout dimensions are specified separately in the original drawing. |
Compatibility
- CGD50/500
Accessories
- BusCon M Gas connection module required.
Original documents & sources
Source pages
- https://www.consiliumsafety.com/content/uploads/products/en/5110001-20/5110001-20A_Control%20M%20Gas%20Internal_I0_EN_2016_A.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5110001-20/5110001-20A_Control%20M%20Gas%20Internal_I0_EN_2016_A.pdf
- https://www.consiliumsafety.com/content/uploads/products/en/5110001-20/5110001-20A_Control%20M%20Gas%20Internal_I0_EN_2016_A.pdf
Original manufacturer data retained. Product enquiry and technical sourcing by MAXONE Marine. Last reviewed: 2026-10-23T05:16:05.796420+00:00.