Salwico IC21 WPL Indication Control Unit
- Original manufacturer
- Consilium / Salwico
- Name
- Salwico IC21 WPL Indication Control Unit
- Model
- Salwico IC21 WPL
- Part number
- 5200278-00A
Supply availability and delivery time require confirmation. A catalog reference does not imply stock.
Specifications
| Manufacturer approvals / certifications | Not provided by manufacturer |
|---|---|
| Manufacturer Article Number | 5200278-00A |
| Inputs | 2 inputs for closing contacts and/or proximity switches (NPN/PNP), 2- or 3-wire. Local indication available. |
| Outputs | Control of single and double doors. |
| Loop Nominal Voltage | 35 VDC |
| Loop Working Voltage | 22 - 38 VDC |
| Loop Working Current | 0.3 mA |
| Input End Of Line Resistor | 30kΩ (Included) |
| Ingress Protection | IP66 |
| Relative Humidity | At low temperature 95% At high temperature 93% ± 3% |
| Ambient Temperature | -40°C to +70°C |
| Cable Gland | TET M20 for cable Ø8-13mm |
| Mandatory External Supply | External 24 VDC supply is mandatory. |
| Required Switch Settings | SW2 DIP 8 must always be ON; DIP 6 and DIP 7 are unused. SW901/SW902 detector range is required only for CM-21 replacement. |
| Door Supervision And Diodes | Without door supervision, jumper INP 2 terminals 4-5; EOL resistor is then unnecessary. Fit each door magnet with its own freewheeling diode and correct polarity. |
| Double-door Sequencing | When OUTPUT 3 is used for a double door, connect the first-door roller/limit switch to INPUT 5; MAG 2 releases only after the first door has closed and the switch opens. |
| Fire-door Fail-safe Scope | For CM-21 replacement, lost system communication closes fire doors after the SW2-selected watchdog timeout; follow the original detector-range and cause/effect setup. |
| Replacement Restrictions | Replacement dimensions differ; discard casing only where marked. Entries marked no replacement require contact with Consilium. |
| Cable Terminals | 2.5 mm² |
| Material | PC/ABS |
| Colour | Transparent/RAL7035 |
| Weight | ~760 g |
| System Compatibility | CS3000, CS3004, CS4000, Salwico Cargo, Salwico Cruise, Salwico LNG, Salwico Offshore, Salwico Ro/Pax, Salwico Workboat, Salwico Yacht, Salwico Navy, OEM Extinguish |
| External Nominal Voltage | 24 VDC |
| External Working Voltage | 19-30 VDC |
| External Max Current | 100 mA |
| External Input Load Limit | 15 mA per input, pulsed |
| External Input Pulse Length | 100 ms |
Compatibility
- Requires technical confirmation; manufacturer compatibility evidence is not provided.
Accessories
- Not provided by manufacturer
Original documents & sources
Source pages
- https://www.consiliumsafety.com/content/uploads/products/en/5200278-00/5200278-00A_Salwico%20IC21%20WPL_M_EN_2014_F_web.pdf
- https://www.consiliumsafety.com/en/product/ic21-wpl-indication-ctrl-unit-5200278-00/
- https://www.consiliumsafety.com/content/uploads/2026/03/5200278-00_IC21-WPL-INDICATION-CTRL-UNIT.png
Original manufacturer data retained. Product enquiry and technical sourcing by MAXONE Marine. Last reviewed: Not provided.