CS-Loop M H Loop-Line Controller Module
- Original manufacturer
- Consilium / Salwico
- Name
- CS-Loop M H Loop-Line Controller Module
- Model
- CS-Loop M H
- Part number
- 5210003-00A
Supply availability and delivery time require confirmation. A catalog reference does not imply stock.
Specifications
| Manufacturer approvals / certifications | Not provided by manufacturer |
|---|---|
| Operating Voltage | 19–30 VDC |
| Operating Temperature | -40 °C to +70 °C |
| Relative Humidity | ≤ 95 % RH non-condensing |
| Material | Nylon 6.6 |
| Weight (with Housing) | 140 g ±5% |
| Ce Conformity | EN 54-2 |
| Approvals | EN 50155, EN 45545-2 |
| Certified According To | Not provided by manufacturer |
| Safety Integrity Level | SIL 1 and SIL 2 |
| Safety Architecture Type | Type B |
| Hft | 0 |
| Sff | 97 % |
| Pfd | 1.96 × 10-4 |
| Pfd Calculation Basis | MTTR 8 h and proof test interval 1 year |
| Continuous Output | 200 mA |
| Maximum Output Current | 400 mA (< 15 minutes) |
| Redundant Power Supply Inputs | Redundant power supply inputs |
| Redundant Communication Channels | Redundant communication channels |
| Fire Condition Channel | A channel for transmitting the fire condition |
| Invalid Dip-switch Condition | All LEDs flashing means all DIP switches are OFF or all are ON; set them according to project documentation. |
| Shielded Loop-line Condition | Connect a shielded loop-line to the CS-IC10 shield terminal; do not connect it to the hazardous-area shield. |
| Mounting | Horizontal 35 mm DIN rail |
| Source Datasheet | Data sheet no. 5210003-00A_CS-Loop M H_M_EN_2022_F |
| Specification Change Notice | The specifications described herein are subject to change without notice. |
| Overall Width | 29 mm |
| Body Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
| Connection Examples | Ex loop-line and Ex spur are distinct source examples; both show device addresses X/Y/Z and a CS-Isolator external earth connection. The examples do not imply unrestricted compatibility or physical wire routing. |
| Current Consumption | 70 mA at 24 V |
| Loop Line Output Nominal Voltage | 35 VDC |
| Maximum Loop Units | 150 loop units |
| Cable Terminals | 2.5 mm2 |
| Storage Temperature | -50 °C to +70 °C |
| Addressing Method | DIP switch |
| Colour | Yellow (RAL 1018) |
| Spare Part (module) | CS-Loop M 5210002-00A |
| Spare Part (housing) | 5210069-00A |
| Loop Cable Requirement | See the Installation & Commissioning manual |
| Compatible Loop Units | All loop units that communicate with the IDAxt protocol |
| Production Mark | 2531/yyyy; yyyy = year of production |
| Indicator And Safety States (indicator-states) — Row 1 — Indicator | ALARM |
| Indicator And Safety States (indicator-states) — Row 1 — Colour / Pattern | Red, steady |
| Indicator And Safety States (indicator-states) — Row 1 — Module Status | One or more fire alarms are present |
| Indicator And Safety States (indicator-states) — Row 1 — Failure Classification | Follow local procedures |
| Indicator And Safety States (indicator-states) — Row 2 — Indicator | ALARM |
| Indicator And Safety States (indicator-states) — Row 2 — Colour / Pattern | Red, flashing |
| Indicator And Safety States (indicator-states) — Row 2 — Module Status | Pre-alarm |
| Indicator And Safety States (indicator-states) — Row 2 — Failure Classification | Follow local procedures |
| Indicator And Safety States (indicator-states) — Row 3 — Indicator | ALARM |
| Indicator And Safety States (indicator-states) — Row 3 — Colour / Pattern | None |
| Indicator And Safety States (indicator-states) — Row 3 — Module Status | There are no alarms |
| Indicator And Safety States (indicator-states) — Row 3 — Failure Classification | N/A |
| Indicator And Safety States (indicator-states) — Row 4 — Indicator | FAULT |
| Indicator And Safety States (indicator-states) — Row 4 — Colour / Pattern | Yellow, steady |
| Indicator And Safety States (indicator-states) — Row 4 — Module Status | One or more faults are present |
| Indicator And Safety States (indicator-states) — Row 4 — Failure Classification | * |
| Indicator And Safety States (indicator-states) — Row 5 — Indicator | FAULT |
| Indicator And Safety States (indicator-states) — Row 5 — Colour / Pattern | Yellow, flashing |
| Indicator And Safety States (indicator-states) — Row 5 — Module Status | Module is booting or re-scanning the loop |
| Indicator And Safety States (indicator-states) — Row 5 — Failure Classification | * |
| Indicator And Safety States (indicator-states) — Row 6 — Indicator | FAULT |
| Indicator And Safety States (indicator-states) — Row 6 — Colour / Pattern | None |
| Indicator And Safety States (indicator-states) — Row 6 — Module Status | There are no faults |
| Indicator And Safety States (indicator-states) — Row 6 — Failure Classification | N/A |
| Indicator And Safety States (indicator-states) — Row 7 — Indicator | PS (Power Supply) |
| Indicator And Safety States (indicator-states) — Row 7 — Colour / Pattern | Green |
| Indicator And Safety States (indicator-states) — Row 7 — Module Status | OK |
| Indicator And Safety States (indicator-states) — Row 7 — Failure Classification | N/A |
| Indicator And Safety States (indicator-states) — Row 8 — Indicator | PS (Power Supply) |
| Indicator And Safety States (indicator-states) — Row 8 — Colour / Pattern | Yellow, steady |
| Indicator And Safety States (indicator-states) — Row 8 — Module Status | Power fault on one of the two power channels feeding the module. A single power fault does not prevent the loop module to communicate with the loop units. |
| Indicator And Safety States (indicator-states) — Row 8 — Failure Classification | Minor fault* |
| Indicator And Safety States (indicator-states) — Row 9 — Indicator | PS (Power Supply) |
| Indicator And Safety States (indicator-states) — Row 9 — Colour / Pattern | Yellow, flashing: 0.5 sec On, 0.5 sec Off. |
| Indicator And Safety States (indicator-states) — Row 9 — Module Status | Boot loader mode. Only active during firmware download to the loop module. In this mode the loop unit can't communicate with the loop units. |
| Indicator And Safety States (indicator-states) — Row 9 — Failure Classification | * |
| Indicator And Safety States (indicator-states) — Row 10 — Indicator | PS (Power Supply) |
| Indicator And Safety States (indicator-states) — Row 10 — Colour / Pattern | Yellow, flashing: 1 sec On, 0.5 sec Off. |
| Indicator And Safety States (indicator-states) — Row 10 — Module Status | Safe State Predefined state to avoid disturbing system integrity. |
| Indicator And Safety States (indicator-states) — Row 10 — Failure Classification | * |
| Indicator And Safety States (indicator-states) — Row 11 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 11 — Colour / Pattern | Green, steady |
| Indicator And Safety States (indicator-states) — Row 11 — Module Status | OK |
| Indicator And Safety States (indicator-states) — Row 11 — Failure Classification | N/A |
| Indicator And Safety States (indicator-states) — Row 12 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 12 — Colour / Pattern | Green, flashing |
| Indicator And Safety States (indicator-states) — Row 12 — Module Status | Unconfigured. Could be a configuration error in the application program file. (Communication working.) |
| Indicator And Safety States (indicator-states) — Row 12 — Failure Classification | Minor fault* |
| Indicator And Safety States (indicator-states) — Row 13 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 13 — Colour / Pattern | Yellow, steady |
| Indicator And Safety States (indicator-states) — Row 13 — Module Status | System fault |
| Indicator And Safety States (indicator-states) — Row 13 — Failure Classification | Major fault* |
| Indicator And Safety States (indicator-states) — Row 14 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 14 — Colour / Pattern | Yellow, steady |
| Indicator And Safety States (indicator-states) — Row 14 — Module Status | Normal condition for defined slave module, if only channel 1 is used. |
| Indicator And Safety States (indicator-states) — Row 14 — Failure Classification | N/A |
| Indicator And Safety States (indicator-states) — Row 15 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 15 — Colour / Pattern | Yellow, flashing |
| Indicator And Safety States (indicator-states) — Row 15 — Module Status | Communication fault on the backbone interface. |
| Indicator And Safety States (indicator-states) — Row 15 — Failure Classification | Major fault* |
| Indicator And Safety States (indicator-states) — Row 16 — Indicator | COM (Backbone communication) |
| Indicator And Safety States (indicator-states) — Row 16 — Colour / Pattern | None |
| Indicator And Safety States (indicator-states) — Row 16 — Module Status | No communication |
| Indicator And Safety States (indicator-states) — Row 16 — Failure Classification | Major fault* |
| Indicator And Safety States (indicator-states) — Row 17 — Indicator | PS + COM (both flashing) |
| Indicator And Safety States (indicator-states) — Row 17 — Colour / Pattern | PS Yellow, flashing |
| Indicator And Safety States (indicator-states) — Row 17 — Module Status | Transferring software. (Download or upload.) |
| Indicator And Safety States (indicator-states) — Row 17 — Failure Classification | * |
| Indicator And Safety States (indicator-states) — Row 18 — Indicator | PS + COM (both flashing) |
| Indicator And Safety States (indicator-states) — Row 18 — Colour / Pattern | COM Green, flashing |
| Indicator And Safety States (indicator-states) — Row 18 — Module Status | Transferring software. (Download or upload.) |
| Indicator And Safety States (indicator-states) — Row 18 — Failure Classification | * |
| System Association | CFD5000 |
Compatibility
Manufacturer-listed system references
- System association
- CFD5000
Check the original document for configuration, installation conditions and restrictions.
Accessories
- Not provided by manufacturer
Original documents & sources
Source pages
Original manufacturer data retained. Product enquiry and technical sourcing by MAXONE Marine. Last reviewed: 2026-10-25T17:58:43.047396+00:00.